New ! Mihm vogt Pre heating furnaces

Pre-heating furnaces
Mihm-Vogt laboratory furnaces are reliable units and easy to operate. Depending on the size of the furnace, the user can choose from heating chambers for 4 - 18 casting muffles with a diameter of 6 - 8 cm, which are heated up evenly on all four sides.

The furnace electronics not only ensure that the set temperatures and heating rates are controlled exactly, but also make the equipment very easy to use. not only start the programs that you have preset individually immediately, but you can also start them using the casting-time feature. The furnace then switches on automatically and preheats your muffles on the required day and at the required casting time.

The two sockets on the unit are also practical and can be used to directly connect a vapour extraction blower or a catalytic converter and an exhaust hood. Switch-off temperatures can be programmed directly via the furnace.

All our pre-heating furnaces are geared towards user-friendliness and longevity. We therefore only use stainless-steel housings with a protective powder coating. The heating chambers are manufactured with care and are coated by hand using fireclay. While the KM model (see figure on the left: KMP7) opens conveniently towards the front, all other larger units have a door that opens handily to the side via a parallel guide.

Functions:
• Electronic microprocessor-based controller P7;
• Precise digital temperature regulation, up to four temperature levels (four holding times and ramps each);
• 30 individual programs with the entry of short texts can be stored;
• Linear heating rate of 1-30 °C/min, separately selectable for each level;
• Heating on all four sides;
• Cast-time function;
• Programmable switch-off temperature for steam extractor, catalyst or extraction hood;
• Comprehensive four-line LED display.

Technical data:
external 48 x 52 x 58 cm; chamber space 200 x 250 x 110 mm; volume 5.8 l; 230 V, 50/60 Hz; power consumption 2600 W; PtRh-Pt thermocouple;
temperature max. 1150 °C; heating-up time 800 °C in 60 min, 1100 °C in 120 min

Accessories included :
-Vapour extraction blower or catalytic converter
-Exhaust hood

Write a review

Note: HTML is not translated!
    Bad           Good

Mihm Vogt Pre-heating furnaces

  • Product Code: Pre heating furnaces
  • Availability: 2
  • $3,445.00

  • Ex Tax: $3,445.00